• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a warm way to heat a room and also save energy. However, they require an amount of care.

Many modern wood stoves comply with EPA emission guidelines. Look for an EPA sticker on the underside or next to the grate, to ensure that your stove doesn't create a lot of harmful pollutants.

How to Start a Wood Fire

The smell and sound of a fire can be an excellent addition to any house. But it's important to learn how to properly create a fire on your stove. Improper techniques can result in a fire which does not burn well, and may produce creosote or smoke. The following tips can help you start an fire that can heat your home with minimum effort and ensure your safety.

Before you start a fire, you should check the condition of your coals and logs. If they're too damp they could smother the flame and stop it from burning properly. You may also want to open the flue to let out any ash that has been deposited into the stove.

Begin by putting a few small contemporary wood burning stove dry newspaper pieces in your stove. This will help to spark the tinder and ignite your kindling. Once the tinder and kindling have started to ignite, you can add the larger kindling pieces on the top. This should be done in a crosshatch pattern so there will be air between each piece of wood.

If your wood stove comes with an automatic combustion control it will automatically feed air to the fire as it expands. This allows the fire to burn for a long time without having to open the stove's door frequently to check on it.

It is important to not use excessive tinder as this could result in an unburned fire that burns at a high rate and doesn't use the fuel as efficiently as it can. Once you've got a good base in your stove with igniters, tinder, and embers to start the main flame, you can do this by placing two large base logs on the grill. Then, on the top of these base logs put a layer of wood perpendicular to them. This method of creating the fire is called a "top-down" fire will result in a powerful and long-lasting fire that does not engulf the larger base logs.

Close the damper when the fire is established and keep it closed. The fire could be smothered by opening the damper before it is fully established. It can also decrease the effectiveness of the fire.

Add Wood

Stoves can be used to efficiently heat your home and save you money. They can be used together with central heating systems or cheap wood burners (http://lzdsxxb.com/home.php?mod=space&uid=2016332) furnace to provide additional heating in large homes. A lot of the clean-burning stoves on the market employ a superior combustion process that differentiates the burning of volatile compounds from combustible gasses and tar by providing air in two distinct stages. The first stage is for the vaporization process, and the second stage is to provide fresh air that has been pre-heated. This improves combustion and reduces the odors.

The amount of heat that you can get from your stove is contingent on both the species of wood used as well as the amount of moisture as well as the size of the logs. The logs should be stacked in a well-ventilated area for several months before you try to burn them to give the wood time to dry out. If the logs are wet they will create plenty of steam that is basically wasted energy.

While you're burning the fire, you should add more wood to the stack at intervals, but not all at all at. In addition, adding too much outdoor wood fire stove at once causes the temperature inside the firebox to rise and creates a vortex, which draws smoke and unburnt volatile compounds back into the flame which can decrease the efficiency of your stove.

Avoid using other combustibles in your stove such as paper or cardboard because they are not wood. They have different physical properties and cannot be burned without causing dangerously high temperatures. It is not recommended to burn compressed combustibles like wood briquettes as they are different in chemical and physical composition from firewood. They are also not approved to be burned in wood burning stoves.

If you're installing wood-burning stoves into your home, it is crucial to have it installed and tested by a qualified. A certified WETT technician will test the installation to ensure safe operation and safety, and also ensure that your chimney is operating properly. These professionals offer maintenance services for your stove and chimney to ensure they are in good shape. They will inspect the areas accessible to your chimney to determine if there is leakage and fix any issues discovered. They will also ensure that all occupants of the home understand and adhere to the fire evacuation procedures in case of an accident.

Adjusting the Damper

A damper regulates how much heat is lost to the chimney when you're not cooking on your stove. In addition, it can also help you to control the flame. If the flue opens but the damper is closed, the fire will not be able to burn as it should and smoke will erupt into your home. To get the most efficient fire, with your damper set correctly, you should play around with different settings and observe how each one affects the flames.

Typically, you should keep the damper open enough to let air in and out of the flue when the fire is burning. This lets the fire get a good fire going and also helps keep it lit so you can enjoy it for long periods of time. The right opening will prevent the fire from being starved of air and prevent it from blowing smoke.

To adjust your damper properly, you must first ensure that the fireplace has been preheated and the wood stove is hot. This will ensure that the chimney stays warm and has good draft. After this, the wood stove damper can be adjusted.

Once the fire has smolder for a while, you can close the damper to about three-quarters of its original position. This will prevent the warm air in the room from venting through the chimney, while allowing the smoke to escape from the wood stove.

This is the best way to keep your fire burning and prevent it from getting too hot. If you shut the damper too much, it may stop the draft from working, however if it is too wide, a cold breeze could blow into your home.

You can test how much the damper is opened by placing your hand on the top of the inside of the flue pipe. If you feel a breeze pushing against your hand, the damper is likely in an open position.

The damper settings may differ between stoves and even among different types of wood. You can play around with different settings to get a sense of the ideal setting for your stove.

Clean up

It is essential to clean your flue and stove after an incident. This reduces the chance of a fire in the chimney which is the main cause of fires that are caused by wood stoves. Creosote, a sticky substance that can build up in the stovepipe, is very dangerous. It is caused by moisture and unburned wood particles that are unable to escape the fire. This can also be caused when fires are not lit properly.

A regular cleaning schedule can help to prevent the buildup of creosote. The best small wood burning stoves method to do this is by sweeping the chimney each year. It is also recommended to get your stove and fireplace professionally cleaned and inspected at least once a every year.

It is also an excellent idea to clean out the Ash tray and grate frequently. It is best to burn only wood that is well-seasoned since it will create less creosote. Avoid burning paper, cardboard and plastic. They could release harmful chemicals for the respiratory tract and the air, and could be released into your home.

It is also important to clean the glass of the wood-burning stove on a regular basis. A lot of modern wood stoves are designed with self-cleaning glass, meaning that they don't require a lot of cleaning. You can apply stove glass cleaners to the window if you're able get the glass as clean as you'd like on your wood stove.

Other tips to keep your wood stove in good condition include lowering the vent when you're not using it and cracking windows or doors to improve airflow. This will ensure that the fire is burning longer and more efficiently. The wood stove will not need to perform as hard to circulate air. It is a good idea not to stack logs, or let them sit on the fire for a long time. This can lead to splitting and warping. It is also a good idea to avoid using compressed combustible wood logs in your wood stove because the paraffin in them could melt and spill into the flue which could cause damage to the stove.