• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Proper lubrication of moving parts is essential for the longevity and yale forklift lift cyclinder price smooth operation of reach trucks. Heres a step-by-step guide on how to effectively lubricate the moving parts of models like the **Toyota 8FBRE** and the **Raymond 7400 Series**:

### Steps for Proper Lubrication

#### 1. **Gather Necessary Tools and Materials**
- **Lubricants:** Use the recommended lubricant specified in the operators manual (usually a high-quality grease or oil).
- **Grease Gun or Oil Can:** Depending on the type of lubricant used.
- **Clean Rags:** For wiping off excess lubricant and cleaning components.
- **Safety Gear:** Gloves and safety goggles to protect yourself during the process.

#### 2. **Prepare the Truck**
- **Park Safely:** Ensure the reach truck is parked on a flat surface and that the forks are lowered to the ground.
- **Turn Off Power:** Switch off the truck and remove the key to prevent accidental operation during maintenance.

#### 3. **Identify Lubrication Points**
- **Consult the Manual:** Refer to the operators manual for a diagram of lubrication points specific to your model.
- **Common Areas to Lubricate:**
- Mast rails and lift chains
- Pivot points on the forks and attachment mechanisms
- Wheel bearings and axles
- Any other specified moving parts

#### 4. **Clean the Area**
- **Remove Dirt and Debris:** Before applying lubricant, clean around the lubrication points with a clean rag to prevent contaminants from entering moving parts.

#### 5. **Apply Lubricant**
- **Use the Right Method:**
- For grease: Attach the grease gun to the fitting and pump until you see grease oozing out slightly from the joint, indicating it is adequately filled.
- For oil: Use an oil can to apply oil directly to the moving parts, ensuring even coverage.
- **Avoid Over-Lubrication:** Too much lubricant can attract dirt and create a buildup, so only apply the necessary amount.

#### 6. **Check Operation**
- **Move Parts:** After lubrication, manually move the parts (if possible) to ensure they operate smoothly.
- **Wipe Excess Lubricant:** Clean off any excess lubricant to prevent buildup and contamination.

#### 7. **Regular Schedule**
- **Follow Maintenance Schedule:** Lubricate moving parts as per the manufacturer's recommended maintenance schedule, typically every month or after a specific number of operating hours.

### Summary
- **Gather tools and lubricants.**
- **Park and power down the truck.**
- **Identify and clean lubrication points.**
- **Apply the correct lubricant.**
- **Check operation and wipe excess.**
- **Maintain a regular lubrication schedule.**

Following these steps will help ensure that the reach truck operates smoothly and efficiently, reducing wear and prolonging its lifespan.
forklifts trucks.com